Suspending the truss adapter
Caution!
Two (2) person lift and placement is recommended for the heavier loudspeakers. Single
person lift and placement of heavier loudspeakers could cause injury.
To suspend the truss adapter, do the following:
1. Remove the M10 screw from the suspension point below the amplifier.
Figure 2.13: Remove suspension screw
2. Insert one (1) eyebolt and one (1) fender washer (supplied).
Figure 2.14: Attach eyebolt
3. Tighten the eyebolt (supplied).
The eyebolt is secured to the loudspeaker.
4. Using two (2) hands lift the loudspeaker.
en 15
Electro-Voice Installation Guide 2014.09 | 03 | F.01U.299.895
Kommentare zu diesen Handbüchern