Electro-Voice Merlin ISP-100 Bedienungsanleitung PDF herunterladen (Seite 2)

ISP-100 Integrated Signal Processor

tal signal input or output. Motherboard

shall provide means to connect up to five,

two-channel, I/O modules. Any conver-

sions to or from the digital domain of the

audio signal shall be performed by said

modules. Mathematical calculations shall

be implemented as such that resultant pre-

cision exceeds current industry standard

test equipment abilities to measure process-

ing noise floor. The unit shall be of a de-

sign and implementation process which lim-

its any and all signal degradation between

20 Hz and 20 kHz to signal I/O conversion.

The efficiency of the processor shall be as

such that the inherent delay of the unit will

be no more than two milliseconds from any

analog input to any analog output with

full processing.

The specified unit shall provide a single

chassis capable of being hardware config-

ured for 2x2, 2x4, 2x6, 2x8, 4x2, 4x4 or 4x6

signal path operation. The specified unit

shall offer 24-bit A/D and D/A converters

with a minimum noise floor of -110 dB and

no more than 0.003% THD+N. The unit

shall have a 1k measurement for THD+N

of 0.002%. The chassis shall be capable of

accepting an AES/EBU (SPDIF) digital I/O

module for signal input and output. Both

digital and analog modules shall be able to

be used simultaneously within the same

chassis in any compliant I/O configuration

as stated above.

Communication exchange between the unit

and PC shall be conducted via RS232 se-

rial port. Unit shall provide a DB-9 connec-

tor accessible from the front of the unit

and a RJ-45 connector on the rear of the

unit for serial connection to the PC. The

unit shall provide a selector switch allow-

ing the operator to choose front or rear

communication connection. The unit will

accept up to eight independent dry con-

tact closures via screw terminal connector.

The unit will provide the means for these

General Purpose Inputs (GPI) to interact

with the software program allowing the op-

erator to switch between programmed pre-

sets using said contact closures without a

PC connected to the unit. GPIs shall be

able to switch system settings to any user

defined preset programmed into the unit.

There shall be no immediately accessible

buttons, knobs or switches on the front or

rear of the unit. The unit shall provide a

hot-swappable battery and tool for battery

removal and installation. The unit will pro-

vide front panel LEDs which will indicate

I/O modules installed, power on/off, sig-

nal clipping and host communications sta-

tus. The unit shall be self-contained within

a 19-inch, single rack space (1 RU) chas-

sis.

The unit shall be compatible with AMX®

RS-232 controls and networks.

Software environment for configuration

and operation of the processor shall pro-

vide static signal path topologies which

provide direct access to displayed proces-

sor options and the means to save mul-

tiple component configuration settings for

said topology in presets independently

which shall then be accessible via the GPI.

The software shall provide a stable inter-

face environment in Windows 3.1/3.11®

and Windows 95®. Audio component

emulation within the program shall incor-

porate readily noticeable means of compo-

nent operation. All displayed metering

during online operation shall incorporate

ballistics. Software shall provide the means

to save all programmed settings to the PC

hard disk. Software program capable of gen-

erating custom signal path topologies for

use in application software shall be made

available to qualified system designers.

The specified signal processor unit shall

be the MERLIN ISP-100.

Limited Warranty

MERLIN products are guaranteed against

malfunction due to defects in materials or

workmanship for a specified period, as

noted in the individual product-line

statement(s) below, or in the individual

product data sheet or owner’s manual, be-

ginning with the date of original purchase.

If such malfunction occurs during the

specified period, the product will be re-

paired or replaced (at our option) without

charge. The product will be returned to the

customer prepaid. Exclusions and Limita-

tions: The Limited Warranty does not ap-

ply to: (a) exterior finish or appearance; (b)

certain specific items described in the indi-

vidual product-line statement(s) below, or

in the individual product data sheet or

owner’s manual; (c) malfunction resulting

from use or operation of the product other

than as specified in the product data sheet

or owner’s manual; (d) malfunction result-

ing from misuse or abuse of the product;

or (e) malfunction occurring at any time

after repairs have been made to the prod-

uct by anyone other than Telex Communi-

cations, Inc. Service or any of its autho-

rized service representatives. Obtaining

Warranty Service: To obtain warranty ser-

vice, a customer must deliver the product,

prepaid, to Telex Communications, Inc. Ser-

vice or any of its authorized service repre-

sentatives together with proof of purchase

of the product in the form of a bill of sale or

receipted invoice. A list of authorized ser-

vice representatives is available from Telex

Communications, Inc. Service by mail at

9600 Aldrich Avenue South, Minneapolis,

MN 55420 or by phone at 612/884-4051.

Incidental and Consequential Damages Ex-

cluded: Product repair or replacement and

return to the customer are the only rem-

edies provided to the customer. Merlin shall

not be liable for any incidental or conse-

quential damages including, without limi-

tation, injury to persons or property or loss

of use. Some states do not allow the exclu-

sion or limitation of incidental or conse-

quential damages so the above limitation

or exclusion may not apply to you. Other

Rights: This warranty gives you specific

legal rights, and you may also have other

rights which vary from state to state.

Speakers and Speaker Systems are guar-

anteed against malfunction due to defects

in materials or workmanship for a period of

five (5) years from the date of original pur-

chase. The Limited Warranty does not ap-

ply to burned voice coils or malfunctions

such as cone and/or coil damage resulting

from improperly designed enclosures. Elec-

tro-Voice active electronics associated with

the speaker systems are guaranteed for

three (3) years from the date of original

purchase. Additional details are included

in the Uniform Limited Warranty statement.

Electronics are guaranteed against mal-

function due to defects in materials or

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Electro-Voice Merlin ISP-100 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Prozessoren Electro-Voice Merlin ISP-100